Panasonic CT-36VG50 - Manual (Page 49)

Set Up Features
Setting DTV mode Set Up Features will also
change TV Mode and PC mode Set Up Features.
Auto Power On
This feature automatically turns the monitor ON when AC
power is applied.
1. Press .
2. Press A or and ^ or ^ to select the Set Up
icon.
3. Press to display the Set Up menu.
4. Press A or W to highlight AUTO POWER ON.
5. Press or ^ to select SET
6. Press twice to exit menus.
Aspect Ratio
This feature is used to change the aspect ratio of the screen
when connected to a DTV unit.
1. Press
2. Press ^ or^ and or ^ to highlight the Set Up
Icon.'
3. Press to display the Set Up menu.
4. Press ^ or ^ to select AUTO, 16:9 (wide picture), or
4:3 (normal picture).
5. Press twice to exit menus.
Color Matrix
This feature is used to change the picture Color Matrix to
Standard or High.
1. Press
2. Press ^orW and or ^ to highlight the Set Up
Icon.
3. Press ^3 to display the Set Up menu.
COLOR MATRt
o___<sa7__^se.______________________—■
‘T. I*- 1Oi lu seieCl MU I u, nu (nign ueiinuion),
or SD (Standard Definition).
5. Press twice to exit menus.
Geomagnetic Corr (Correction)
This monitor incorporates a special adjustment feature for
the convenience of the customer. This adjustment is preset
at the factory. However, adjustment may be required when
the monitor is moved (due to the influence of earth’s
magnetic field) which may cause the picture to tilt slightly. If
necessary, follow these procedures to adjust the tilt.
1. Press ^3.
2. Press ^ orW and ^ or ^ to highlight the Set Up
Icon.
3. Press (^3 to display the Set Up menu.
4. Press A or ^ to highlight GEOMAGNETIC CORR.
5. Press ^ or ^ to display the Geomagnetic Correction
adjustment menu.
6. Press ^ or ^ to adjust the picture tilt until left and
right side of tilt adjustment bar is parallel to the bottom
of picture frame (if necessary).
NOTE: Discoloration may be visible in picture corners
if tilt bar is not parallel to the bottom of picture
frame.
7. Press twice to exit menus.
- 4 8 -