Panasonic PANAFLAT TX-D5L31F - Manual (Page 6)

Features
1) Active Matrix-Liquid Crystal Display (*AM-LCD) panel
• The 15 inch (15.0" / 38.1 cm Viewable Image Size) 1024 x 768 pixels (0.297 mm pixel pitch)
AM-LCD pane! with anti-glare hard coating give you a low reflection, anti-static, high-resolution
true color (equivalent of 16.19 million color) and hIgh-contrast display.
2) Easy to use digital controls with on-screen menus
• Digital Brightness and Contrast adjustments are directly accessible form the front panel.
• On-screen menus are available in 5 languages: German, French, English, Italian or Spanish.
• Custom adjustments can be made quickly and easily through the icon-based on-screen menu
utilizing five soft touch buttons on the front panel.
• The on-screen icon-based main menu allows scrolling through the icons with the currently
selected icon being identified on the choice bar located at the bottom of the menu.
3) The LC50S / LC50SG is Windows®95 / 98 Plug & Play compatible
• The LC50S / LC50SG is a Video Electronics Standards Association (VESA) Display Data
Channel (СОС^*^) DDC 1/2B* compatible monitor which meets the Microsoft® / Intel* Plug &
Play Definition. This allows the LC50S / LC50SG to inform a compatible host using Windows 95
/98 of its capabilities.
4) Environmentally Friendly
• LC50S / LC50SG typical power consumption is 50% less than that of a Panasonic CRT color
monitor.
• VESA DPMS (Display Power Management Signaling) computers when used with the LC50S /
LC50SG allows further reduction in power consumption. (See Power Management System
Page 16.)
• The LC50S / LC50SG conforms to the international E nergy S tar ® program standards.
• Meets MPR II and TCO’92 provisions regarding electromagnetic and electrostatic fields.
• Uses less desk space due to the 7.88" (20 cm) depth.
5) Color Temperature control
• There are three color temperatures that may be selected: Normal, 9300K or a User Color.
• User Color allows the white balance of an image to be adjusted by individual control of the
Red (R) and Green (G) and Blue (B) levels. This feature enables color matching of the monitor
colors to the output of a color printer. (See Color selection page 14.)
6) PanaFlat digital multi-scan
• Horizontal frequencies of 30 kHz to 61 kHz and vertical frequencies of 50 Hz to 77 Hz separate
sync can be automatically tracked. The LC50S / LC50SG is suited to VGA. SVGA, XGA and
VESA, timings up to 1024(H) x 768{V) / 75 Hz max. FCC Class B.
• Sixteen user programmable timing memories in addition to the fifteen factory preset timing
selection (Reservations) for image size and position are provided. (See Memories, Page 16
and Timing Specifications, Page 17.)
• Use of a pixel conversion method enables full-screen display of all modes from 640 x 480 /
60 Hz up to 1024 X 768 / 75 Hz separate sync. Full-screen display may not be possible
depending on the input signal timing. (See Auto Size, Page 15 & Timing Specifications, Page 17.)
7) Auto Size & Centering
• Based on the input signal, the adjustments for the H. POSITION / H. SIZE, V. POSITION /
V. SIZE in the 640 x 400 to 832 x 624 modes are performed automatically. H. FINETUNE and
V. FINETUNE are adjusted automatically in the 1024 x 768 mode. Manual adjustment of these
controls may be required when a 1024 x 768 modes is used or depending on the input timing.
8) Self-test menu
• You can test your LC50S / LC50SG by using the MONITOR SELF-TEST menu that is
displayed on the screen. This menu will display if any one five front panel control switches is
pressed and there are no video signals at the input connector of the monitor. (See MONITOR
SELF-TEST, Page 15.)
9) USB Hub in Base
• USB Hub built into tilt base permits the connection of four (4) USB Accessories to a computer
that has hardware and software support of USB. (See Page 9.) One (1) upstream (Type A)
connector & Four USB downstream (Type B) connector provided.
10) Stereo Speakers for High Quality Stereo Sound
• High Quality Sound from bass reflex speakers and Bass-boost circuit technology.
• Stereo speakers (1 W + 1 W).
• External headphone jack is mounted on the front panel of the LC50S / LC50SG monitor.
- 5 -