Panasonic PV C2032W - Manual (Page 22)

Timer Recording
You can set up to 8 programs to be recorded while
you are away.
1 Press PROG to display SET PROGRAM
screen.
SET PROGHAM
mss
SELECT rA T
SET :►
END :PH0G
1) Press AT to select
TIMER
PROGRAMMING.
2) Press ► to display
screen.
• If a program is already in
memory, press AT, and
^ to select an unused
program number.
START STOP CH
SELECT:* »
SET :►
END :PROQ/ACTION
Press AT to select
and ► or ◄ to set the
recording DATE.
• 1-31= One time
• DAILY = MON-FRI
• WEEKLY SUN-SAT
= Same time once a week
Example
r
8-9' "31— 1 —2'
DAILY Today’s-__ 7 SELEC t A/V Selection Order
Date [ w e e k l y weekly _________________ weekly ^
(SAT) .......... (MON) (SUN)
Repeat step 3 to set:
• start time, stop time
• Channel {or LINE for outside source)
• Speed (SP, LP, SLP)
P OT START STOP CH SPO
CANCEL:ADD/DLT
SELECT
1-8:* T
ENTER :►
END
t PROG/ACTION
Press PROG (or
ACTION) to end the
program.
To Enter More Programs,
press AT to select
and ► to set a blank
program number, and
then repeat step 3.
Press PROG twice (or ACTION)
to exit this mode.
• If you’re using a cable box, make sure that it is
tuned to the desired channel and the power is
left on for timer recording.
• PROG TIMER indicator lights on the unit.
Ready Check List
□ All connections are made.
□ Your unit is plugged in.
□ The clock is set to correct time.
□ The tape is long enough.
□ The record tab is in place.
Timer Recording Using _
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See Page 11.)
VOL CH
O © O 0 Q Q
— ACTION—
1 Press STOP/EJECT and REW
together without a tape inserted
to display MAIN MENU.
2 Press
AT
+ - to select “VCR"
and STOP/EJECT and REW
together to display SET UP VCR
screen.
3 Press
AT
+ - to select "TIMER
PROGRAM and + to display the
TIMER Program Screen.
4 Repeat main steps 3 - 5 .
22
For assistance, please call : 1-SCO-211-PANA(7262) or send emiail to : cortsurrierpfDducte@pariasonkxcom