Panasonic PV C2032W - Manual (Page 32)

On-Screen Display (OSD)
VCR Status & Clock Display Blue Screen Display
Press DISPLAY
to display or remove the overlay.
Channel Caption
(See page 28.)
Function Status
Current Time Counter
Rec Time
Remaining
(OTR mode oniy,
see page 12.)
REC 12;00PM ABC/1
0:25 -0:12:34^
SP
Whenever a blank section of a tape comes
up in Piay mode, or when the selected
channel has no broadcast signal with the
Weak Signal Display set to “OFP (see
page 27), the screen will turn solid blue.
Channel & Function Display
When a function button is pressed (PLAY,
FF, etc.) or you change channels, the unit
mode or channel number will be displayed.
(Some station names may also appear if
Channel Caption is set. See page 28.)
Tape Speed
Warning and Instruction Displays
These displays wiii alert you to a r,tissed
operation or provide further instructions.
OSD Caution Page
PLEASE SET CLOCK BEFORE
PROGRAMMING • If you attempt to set or review a Timer Recording,
or set the On-Timer and the Clock is not set...
8- 11
CHECK CASSETTE RECORD TAB • If you press REC, and a cassette is inserted with
no record tab...
3, 12
TO CANCEL TIMER REC HOLD DOWN
STOP KEY FOR APPROX 3 SEC
• If you press STOP during a Timer Recording... 23
NO CASSETTE
PLEASE INSERT A CASSETTE • If you press PLAY, FF, REW, or REC without a
cassette inserted...
12
PLEASE PREPARE FOR TIMER REC • If the unit is not in Stop mode or a cassette with
record tab is not inserted two minutes before a
Timer Recording is about to begin...
22. 23
VIDEO HEADS MAY NEED CLEANING
PLEASE INSERT HEAD CLEANING
CASSETTE OR REFER TO MANUAL
END: PLAY KEY
• If head cleaning becomes necessary while playing
back a tape...
4
VCR LOCK ACTIVATED
• If you press a function button other than STOP/EJECT
or POWER while the unit is in VCR Lock mode...
27
32
For assistance, please call : 1-800211-PANA(72G2) or serxl email to : [email protected]