Auto operation functions, Auto shut off, Auto rewind – Panasonic PV C2032W User Manual
Page 25: Tape position display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Auto Operation Functions
Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF), blank
tape is Played for 5 minutes
=> Power turns off
• This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
=> Power turns on
• Playback begins if tape has no record tab.
Auto Rewind
Tape reaches its end
=> Rewind => Stop
Playback Auto Eject (Repeat Play Is “OFF’)
Tape with no record tab reaches its end
Rewind => Stop => Eject
Tape Position Display
SELECT/SET
A :CH UP
▼ ;CH DOWN
► ;VOL UP
◄ :VOL DOWN
NUMBER
Keys
FF
SEARCH
REW
TAPE
POSITION
To find out present tape position and amount of tape
remaining.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
1
Press TAPE POSITION to detect
current tape position.
DFTÏCTINO TAPE POSITION
' "So
• “DETECTING TAPE POSITION",
is displayed only when a
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
• Tape remaining time display may|
not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
CE®
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over
120 minutes in length.
25