Lcd (liquid crystai dispiay), Intl, Hiuo t-scan pup memo^dual – Panasonic KX-G2200A User Manual
Page 12: Lcd {liquid crystal display), Usa intl can
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LCD (Liquid Crystai Dispiay)
USA
INTL
CAN
WX
fO
HIUO T-SCAN PUP
MEMO^DUAL
USA
Shows USA mode.
INTL
Shows International mode.
CAN
Shows Canadian mode.
WX
Shows Weather mode.
Channel Display
Displays the channel in use.
HI
Shows the High Power (25 Watt) mode.
LO
Shows the Low Power (1 Watt) mode.
SCAN
Shows unit Is in Channel Scan mode.
T-SCAN
Shows unit is in the TIme-Scah mode.
Scanning starts again automatically even if a signal exists.
DUP
Shows that the unit is in the Duplex mode.
MEMO
Shows that the unit is in the Memory mode.
Only memorized channels are shown.
M
In INTL, CAN, USA and WX modes, shows that the displayed channel
has been memorized.
It is possible to set or reset the desired channel in Memory.
DUAL
This function allows periodic checking for activity on CHI 6 while receiving
another channel.
TX
Shows that the unit is transmitting.
0
Shows that the Function button has been pressed. For six seconds after
pressing the Function Button, the Secondary Functions of each button are
available.
—
Shows that the Channel Memory is empty, (no channels have been
memorized.)
► DUAL Shows that the Triple Watch is on.
►
Shows that the displayed channel is on program of Triple Watch channel.
11 -