Panasonic DVD-RV40 EN - Manual (Page 14)

c
.0
I
I
.o
iS
QQ
Basic play
A
Stopping play
Press [■] during play.
•The player records the point where [■] was pressed during play.
(“O” flashes on the player’s FL display.)
To resume play from where you stopped it
(RESUME function)
Press [►] while is flashing on the FL display.
Play will resume from the point where [■] was pressed.
To clear the RESUME function
Press [■] again or open the disc tray while “l>” is flashing on the FL
display,
riBKi
•The RESUME function works only with titles for which the elapsed
playing time appears on the player's FL display during playback.
•This feature remains active if the player is switched to the standby
mode and then turned back ON.
Chapter review function
DVD
This function plays the first few seconds of each chapter from the
beginning of the title up to the point where operation was stopped.
This makes it possible to review previous chapters.
1. Press [►] while “l>” is flashing on the FL display.
(The message illustrated is briefly displayed.)
2. Press [ > - ] again while the message is displayed on the
screen.
Normal playback will commence from the point where operation was
Stopped.
•Canceling the RESUME function will also clear the chapter review
function.
•The chapter review function may not work with some DVDs.
■ After operation
When the player is not in use, remove the disc and press
[C!)/l] to switch the player to the standby mode.
The player is automatically switched to the standby mode after
30 minutes or so have elapsed in the stop mode.
(Auto power-off function)
►The disc continues to rotate while the menu is displayed even after
the player has finished playing a particular item. Stop the player
when you finish viewing to preserve the player’s motor and prevent
screen burn.
VQT8633