Panasonic DVD-RV40 EN User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting an amplifier with 6.1-channel audio input terminals
dvd
-
rv
40
This unit can decode Dolby Digital. Connect an amplifier with 5.1-channel discrete input terminals to enjoy surround sound.
When you have finished connection
• In “8 Speaker Setting”, select “1 Multi-channel” and make changes to suit your speakers (■► page 39).
Speaker presence: Select “Yes” if the corresponding speaker is connected.
Select “No” if the corresponding speaker is not connected.
Center and surround speaker delay time (Dolby Digital DVD only): Adjust if you cannot place your speakers in the optimum position.
Channel balance:
Adjust the output level of the speakers to make up for differences in volume caused by different types of speaker or
distance.
• Go to “7 Digital Audio Output” and set “1 PCM Down Conversion” to "No” (■ * * page 37).
•Turn off V.S.S. page 20) if you have connected a subwoofer, center speaker, or surround speakers as well as the front speakers. Sound
will not come from the other speakers if V.S.S. is on,
•Additional equipment and cables are not supplied.
VQT8633