Clarion FB275BTB - Manual (Page 20)

20
English
FB275BT / FB275BTB
What is pairing?
With a mobile phone featuring Bluetooth ® tech-
nology, you must ʻpairʼ the main unit with the
phone/ Bluetooth ® audio device before you use it
for the first time.
Pairing creates a unique and encrypted link be-
tween two Bluetooth ® devices and lets them com-
municate with each other eliminating the need
to repeat the pairing process during future use.
Bluetooth ® devices will not work if the devices
have not been paired. This car stereo is able to
hold up to 8 devices of pairing information.
What is passkey?
Passkey or PIN is a code that you enter on your
mobile phone to pair it with the main unit. This
makes your phone/ Bluetooth ® audio device and
the main unit recognizes each other and auto-
matically works together. The default passkey for
this unit is ʻ0000ʼ.
Pairing with a mobile phone
1. Enable pairing mode in the car stereo. Please
refer “Adding a new device ( Pairing mode)”
on page 29 for more details.
2. Activate Bluetooth ® on your mobile phone.
Please check your mobile phone ownerʼs
manual for further details.
3. Search for new Bluetooth ® device on the mobile
phone. The car stereoʼs name is “CLARION_
FB275”.
4. When attempting to connect to the car stereo,
the mobile phone will prompt for a passkey,
enter the PIN: “0000”.
5. Device name will be displayed for editing after
successful pairing. Please refer “Editing a
device name” step 3 onwards on page 29 for
more details.
6. The display returns to previous mode after a
few seconds.
7. Any incoming call will be automatically diverted
to the car stereo once connection is estab-
lished.
Introduction to Bluetooth ® Wireless Technology
Notes:
Please make sure your mobile phone supports the
HFP profile.
Always make sure the Bluetooth ® Operation mode
in the phone is on when using this car handsfree.
Any further connection attempts by other devices
to connect as HFP partner are rejected until the
current device is disconnected. Please refer your
mobile phone ownerʼs manual for disconnecting
device.
Up to the first 8 characters of device name can
be supported. If device name is not obtained,
Bluetooth ® address of the device will be used as
default.
Please refer chapter “Handsfree Operations” on
page 22 for telephone function.
Pairing with an external Bluetooth ®
audio player (A2DP support)
1. Enable pairing mode in the car stereo. Please
refer “Adding a new device ( Pairing mode)”
on page 29 for more details.
2. Set the Bluetooth ® audio player in Pairing
mode. Please check your audio player ownerʼs
manual for further details.
3. The display automatically switches to BT Audio
mode and start playing music upon success-
fully pairing and connection. Connection can
be established in any Source mode.
Notes:
Please make sure your Bluetooth ® audio player
supports the A2DP and AVRCP profiles.
Any further connection attempts by other devices
to connect as A2DP/AVRCP partner are rejected
until the current device is disconnected.
You do not have to enter a dedicated pin code
for pairing these two devices (Only applicable to
Clarion products such as Aux Bluetooth ® Transmit-
ter), as you do with a mobile phone. However, for
other A2DP devices, you may need to enter “ 0000”
for the pin code in those devices.