Precautions, Dcp (detachable control panel), Caution – Clarion FB275BTB User Manual

Page 3: English 3 8 english

Advertising
background image

4

FB275BT / FB275BTB

Be sure to unfold and read the next page.

Veuillez déployer et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

3. HANDLING MEMORY CARD

Do not leave the card in vehicle where

there is high temperature or direct sunlight

or where electromagnetic waves or electro-

static are easily generated.

SD/MMC Memory Card

When the card is being read, do not re-

move the card.

After eject operation, always remove the

memory card from the slot; otherwise, the

flip down panel may not be closed prop-

erly.

After usage, store the supplied memory

card in the enclosed case.

Do not allow dirt, dust or water to enter it.

Do not bend or drop the card. The card or

the recorded content may be damaged.

Do not touch the terminals on the back of

the card with your fingers.

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation.
This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio communica-

tions. However, there is no guarantee that inter-

ference will not occur in a particular installation.
If this equipment does cause harmful interfer-

ence to radio or television reception, which can

be determined by turning the equipment off and

on, the user is encouraged to consult the dealer

or an experienced radio/TV technician for help.

2. PRECAUTIONS

USE OF CONTROLS, ADJUSTMENTS,

OR PERFORMANCE OF PROCEDURES

OTHER THAN THOSE SPECIFIED HEREIN,

MAY RESULT IN HAZARDOUS RADIATION

EXPOSURE.
THE COMPACT DISC PLAYER SHOULD NOT

BE ADJUSTED OR REPAIRED BY ANYONE

EXCEPT PROPERLY QUALIFIED SERVICE

PERSONNEL.

CHANGES OR MODIFICATIONS TO THIS

PRODUCT NOT APPROVED BY THE MANU-

FACTURER WILL VOID THE WARRANTY

AND WILL VIOLATE FCC APPROVAL.

INFORMATION FOR USERS:

CAUTION

!

English

3

8

English

FB275BT / FB275BTB

6. DCP (Detachable Control Panel)

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (Detachable Control Panel) case to

prevent scratches.
We recommend taking the DCP with you when

leaving the car.

2. Press in the [RELEASE] button.

3. Pull the DCP toward you and remove it.

Removing the DCP

1. Press the [

SRC] button for 1.5 seconds or lon-

ger to switch off the power.

The flip down panel can only be opened up to

65˚, please do not forcibly push to open fur-

ther.

The DCP can easily be damaged by shock.

After removing it, be careful not to drop it

or subject it to strong shocks.

The connector connecting the main unit

and the DCP is an extremely important

part. Be careful not to damage it by press-

ing on it with fingernails, pens, screwdriv-

ers, etc.

CAUTION

!

Note:

If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

4. Close the HOLD FLAP.

Attaching the DCP

1. Insert the right side of the DCP into the main

unit.

2. Insert the left side of the DCP to attach into

the main unit.

Storing the DCP in the DCP case

Hold the DCP, in the orientation as shown in the

figure below, and put it into the supplied DCP case.

(Ensure the DCP is in the correct orientation.)

FB275BT / FB275BTB

SD Logo is a trademark.
The

Bluetooth

®

word mark and logos are owned by the

Bluetooth

®

SIG, Inc. and any use of such marks by Clarion Co.,Ltd. is

under license. Other trademarks and trade names are those of their respective owners.

Warning:

Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the

userʼs authority to operate the equipment.

Operation is subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Advertising
This manual is related to the following products: