Clarion FB275BTB - Manual (Page 27)

27
English
FB275BT / FB275BTB
Adjusting the loudness
The loudness effect does not adjust the low
sound area like the normal sound adjustment
function, but emphasizes the deep bass sound
area to provide you with a dynamic sound.
2 - 1 . Select “LOUDNESS”.
3 - 1 . Turn the [ ] knob to select “ ON ”
or “ OFF ” .
ON : Loudness effect enabled.
OFF : Loudness effect disabled.
Note:
The factory default setting is “OFF”.
Common Operations
Setting the clock mode
This setting allows user to select either 12 or 24
hour system.
1. Select “CLK MODE”.
2. Turn the [ ] knob to select the
options.
“CLK EN”
“CLK MODE”
“CLK SET”
Clock adjustment
2 - 1 . Select “CLOCK”.
3 - 1 . Push the [ ] knob.
3 - 2 . Press the [ , ] button to select the
“item name”.
3 - 3 . Push or turn the [ ] knob de-
pends on selected item.
Setting AUX function
This option allows user to enable or disable the
AUX function. AUX function will be available in
Source mode selection if turned on. Otherwise, it
will be hidden from the Source mode selection.
2 - 1 . Select “AUX INPUT”.
3 - 1 . Turn the [ ] knob to select “ ON ”
or “ OFF ” .
ON : Aux function is turned on.
OFF : Aux function is turned off.
Note:
The factory default setting is “ OFF”.
ON : Clock is enabled and manually set by
user.
OFF : Clock is disabled.
Note:
The factory default setting is “ OFF”.
“12 HR” “24 HR”
12 HR : 12 hour mode.
24 HR : 24 hour mode.
Note:
The factory default setting is “12 HR”.
Adjusting the clock
This adjustment allows the clock to be set by
user.
1. Select “CLK SET”.
2. Push the [ ] knob.
3. Press the [ , ] button to select the hour
or the minute.
4. Turn the [ ] knob to set the cor-
rect time.
5. Press the [ ] button to exit the setting.
Notes:
The factory default setting is “ 00:00” for 24 hour
mode.
The clock is updated in realtime.
Setting the clock enable
This setting allows the clock to be displayed at
the bottom of display in all Source modes.
1. Select “CLK EN”.
2. Turn the [ ] knob to select
“ ON ”
or “ OFF ” .