Panasonic DVD-RV21 - Manual (Page 8)

Connection to a television
u
S
V)
cn
.c
£
0)
yj
DVD-RV41 I DVD-RV31 IOiS[3M[DyE^
These pages explain how to connect the unit to a television and set it up so you hear the audio through the television’s speakers. Connections and
procedures that enable you to enjoy more powerful sounds are described beginning on page 27.
Before connection
• Disconnect the AC power supply cord.
• Refer to the television's operating instructions.
□ S VIDEO OUT terminal
The S-vtdeo terminal achieves a more vivid picture than the VIDEO
OUT terminal by separating the chrominance (C) and luminance (Y)
signals. (Actual results depend on the television.)
□ COMPONENT VIDEO OUT terminal
Connection using these terminals outputs the color difference signals
(P
b /P h ) and luminance signal (Y) separately in order to achieve high
fidelity in reproducing colors.
•The description of the component video input terminals depends on
the television or monitor (e.g. Y/Pa/Pn, Y/B-Y/R-Y, Y/C b /C r ). Con­
nect to terminals of the same color.
• After making this connection, change the black level for a better pic­
ture (•• page 22, Video-Black Level Control).
Conserving power
This unit consumes a small amount of power, even when it is turned
off.
^ ~ I; approx. 2.5 W
{For U.S.A. and Canada); approx. 2 W
(For others):
approx. 4 W
IDVD-RV21 ; approx. 2 W
DVD-RV41
DVD-RV31
lRSDiBy.26)
To save power when the unit is not to be used for a long time,
unplug it from the household AC outlet.
DVD-RV31
For units sold outside U.S.A. and Canada
If the power plug does not fit your AC outlet
Use the power plug adaptor (included).
If it still doesn't fit, contact either a local or foreign electrical parts
distributor for assistance.
Connect Your Unit Directly To Your Tele­
vision.
Do not connect the unit through your video cassette recorder
when setting up your home entertainment system, because the
picture may not be played correctly due to the copy guard.