Panasonic TC 42P1F - Manual (Page 25)

Picture Menu
1. Use the Position Up “A” or Down "T” ----
buttons to select the “Manual W/B” menu
from the “Picture” menu, and then use the I ▼ I
Position Right button to select “On”.
2. Press the Position Down button,
{The “Manual W/B” menu screen will then \' t \
be displayed.)
3-Select the required function by pushing the
Position Up “A” or Down “T”buttons, and [T a " j
access and alter the setting by pushing the
Position Left or Right buttons.
1,2
C±] CB
PirilirA
^ luilL ^ ® Cl IB- Adfud
j Picture Mode 1 Dvnamk: 1 1
¡Colour [T|r i •']
¡Tint
! Brigtitnew m,-'
I Contrast Mir '
I Sharpness m,- 1
I Whits batanca 1 Warm 1 1
1 ManuEil W/B 1 1 1
MEMu
Qe«
WIB High B
WB Low R
oli
Item Effect Adjustment range Details
W/B High R
◄ ►
Less More
-30 - 30 Adjusts the white balance for light red areas.
W/B High B
◄ ►
Less Mora
-30 - 30 Adjusts the white balance for light blue areas.
W/B Low R
◄ ►
Less More
-30 - 30 Adjusts the white balance for dark red areas.
W/B Low B
◄ ►
Less More
-30 - 30 Adjusts the white balance for dark blue areas.
Note:
(1) Carry out “W/B” adjustment as follows.
(t) Adjust the white balance of the bright sections using the “W/B High R” and “W/B High B” settings,
d) Adjust the white balance of the dark sections using the “W/B Low R” and “W/B Low B” settings,
d) Repeat steps 0 and (D to adjust.
Steps ® and (D affect each other’s settings, so repeat each step in turn to make the adjustment.
(2) The adjusted values are memorised separately for each Picture Mode (Normal/Dynamic).
(3) The adjustment range values should be used as an adjustment reference.
-f-Helpful Hint ([^Normalisation)
If the N button on the remote control unit is pressed when the “Manual W/B” menu is displayed, all adjustment values
will be returned to the factory setting ievei.
25