Remote control batteries, Note, Set-up – Panasonic TC 42P1F User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Control Batteries
(+ and -)'■
Note:
(1 ) Make sure that the batteries are fitted the correct way round.
(2) Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
(3) Do not mix different battery types, i.e. Alkaline and Manganese. Do not use rechargeable (Ni-Cad) batteries.
Set-up
Be sure to use the special installation brackets (refer to page 6) when set up the Wide Plasma Display.
Always be sure to ask a qualified technician to carry out set-up.
(Example) When using the pedestal to set up the Wide Plasma Display
1 2
Assemble the pedestal by
attaching the poles.
Secure the Wide Plasma Display
into the holes in the bottom of the at the back using the four screws.
Wide Plasma Display.
Note:
(1) Refer to the Installation Instructions supplied with the pedestal for details on assembling the pedestal.