Precautions for setting the stiii timer, Operation, Stop mode – Panasonic DVCPRO AJ-D220 P User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operation
Stop mode
The unit is set to the stop mode when the STOP button is pressed.
The STOP lamp lights and the tape stops traveling.
• In order to protect the tape, the unit is set to the tape protection mode after the period
of time set in the “STILL TIMER” set-up menu item has elapsed. (See page 21) When
the STOP, REW, FF or PLAY button is pressed, the unit is set to the corresponding
mode.
<Precautions for setting the stiii timer>
• When the same part of the same tape is used repeatedly, the cumulative standby time in the
same place increases.
In order to protect the tape, set the standby time for the same place on the same tape to as
short a duration as possible.
-11
-