Panasonic DVCPRO AJ-D220 P - Manual (Page 23)

Set-up Menus
VIDEO menu
Item Setting
Description of settings
No.
Superimposed
display
No.
Superim posed
display
600 VIDEO MODE 0000
om B/W
COLOR
For setting what video signals are to be used for
playback.
0: For using monochrome signals.
1: For using color signals.
• To use monochrome signals for playback, set this
item to the B/W mode. To use normal color signals,
set it to the COLOR mode.
601 V-MUTE SEL om
0001
N-MUTE
LOW-RF This selects whether the video signals are to be muted
during playback under low RF conditions or when the
servo lock is disengaged.
0: Video signals are not muted.
1: Video signals are muted.
602 CC (FI) BLANK 0000
eoQi
BLANK
THRU
This selects ON or OFF for the closed capture signal in
the first field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
603 CC (F2) BLANK 0000
QQQl
BLANK
THRU
This selects ON or OFF for the closed capture signal in
the second field.
0: Signal is forcibly blanked.
1: Signal is not blanked.
The underlined number and item are the factory settings.
AUDIO menu
Item Setting
Description of settings
No.
Superimposed
display
No.
Superimposed
display
700 SEARCH CUE 0000
0001 OFF
ON
This selects whether the cue audio signals are to be
output during search or during fast
forwarding/rewinding (VV).
0: Signals are not output.
1: Signals are output.
701 DV PB ATT
om
0001
OFF
ON
This selects the audio output level during DV format
playback.
0: Normal playback level
1: Output level is controlled only during DV format
playback.
702 PB MUTE
om
0001
OFF
ON
This selects whether the sound is to be muted during
playback at the tag recording points.
0: Sound is not muted.
1: Sound is muted.
However, it may not be possible to mute the sound at
the edit OUT point.
The underlined number and item are the factory settings.
- 2 3 -