Panasonic 5.8 GHZ EXPANDABLE DIGITAL CORDLESS ANSWERING SYSTEM KX-TG6074 - Manual (Page 38)

Multi-unit Operation
Intercom
Intercom calls can be made:
- between handsets
- between the handset and base unit
Note;
• If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press [OFF], then press [*>].
To answer the call with the base unit,
press [SP-PHONE] 2 times.
• You can locate a misplaced handset
by paging it (handset locator).
• When paging a unit for an intercom
call, the paged unit beeps for 1
minute.
Making an intercom caii
Handset
1 [INTERCOM]
2
[T]/[i]:
Select the desired unit. —>
[Select]
• To stop paging, press [OFF].
3 When you finish talking, press
[OFF].
Ease unit :
1 [LOCATOR/INTERCOM]
2
To page a specific handset, enter its
extension number ([1 ] - [4]).
To page all handsets, press [0] or
wait for a few seconds.
• To stop paging, press [LOCATOR/
INTERCOM]
3 When you finish talking, press
[SP-PHONE]
Answering an intercom call
Handset
1 Press [*>] or [<-] to answer the
page.
2 When you finish talking, press
[OFF]
Base unit
1 Press [SP-PHONE] or [LOCATOR/
INTERCOM] to answer the page.
2
When you finish talking, press
[SP-PHONE].
Note for handset and base unit:
• When the ringer volume is set to off,
the handset or the base unit rings at a
low level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between the handset and base unit, or
between
2 handsets. The handset and
base unit, or 2 handsets can have a
conference call with an outside party.
Handset: :
During an outside call, press
[INTERCOM] to put the call on hold.
: Select the desired unit. —>
[Transfer]
Wait for the paged party to answer.
• If the paged party does not answer,
press [">] to return to the outside
call.
To complete the transfer:
Press [OFF].
• The outside cali is being routed to
the unit.
For assistance, please visit http://www.panasonic.com/heli