Panasonic WV-CU20 - Manual (Page 129)

(2) EL ZOOM
Opens the EL ZOOM panel on the bottom center of the
window while + sign is displayed in the Image Display
representing the center of the area to be enlarged.
(D VCR/CAM SELECT
Switches the output of the video multiplexer between
VCR playback and camera image.
CD
ALARM RESET
Resets the alarm mode activated on the WJ-FS416.
® Status Window
Displays information when an alarm is activated on the
WJ-FS416.
@ Image Display
Displays the output image supplied from the WJ-
FS416,
® Camera Control Buttons
These buttons control the combination cameras select­
ed with CAMERA SELECT button.when the cameras
are connected to WJ-FS416 via WJ-MP204.
© UP/DOWN/LEFT/RIGHT Buttons
These buttons move the + sign to the area you wish to
enlarge in the Image Display. After zooming, the but­
tons scroll the enlarged image up, down, right or left.
® EL ZOOM ON
Clicking this will enlarge the image designated with the
+ sign.
® EL ZOOM OFF & RETURN TO CAMERA CONTROL
Resets EL ZOOM function to the normal display,
• Control Operation for Digital Hard Disk Recorder (WJ-HD100)
To change the window to WJ-HDIOO CONTROL, follow the steps below.
1, In the FS-416 Control window, click VCR/CAM SELECT button to display the image supplied by the WJ-HDIOO.
2, In the FS-416 Control window, select UNIT #2 with the pull down button of the Unit/System SELECT area. The WJ-HDIOO
CONTROL window is displayed.
[ \ J/i g 1 tto 1 d ;
’Wj-EDltW CONTROL
41
-<D
■<D
6 © © #
129