User authorization, User registration, Delete user – Panasonic WV-CU20 User Manual
Page 88: User setup
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ USER SETUP
On the
ADMINISTRATOR SETUP PAGE,
click the
USER
button to display the
USER SETUP
window. Use this window to reg
ister or delete users.
>
lx
—
■!-
:
ä
;P
__
USER SETUP
USIK AUTHOXIZATIO N
iTsEK
authorization
; !»■
off
'* OH ;■
■'ISSKiiii
<D
VaitLBX
UlSTtLATtON
[USERHAiC
^
R'Äjäwö'RI)'"" p
i
I ;■. KADMIMISmTOiJ
i
[ACCESS LEVEL;;MNPin'iELECIfOFERATIOH>i
;
; C jaiOHITOr. ONLY)
I
■
SU8>*ti
DELFIE l’S£R
OELETEUSEE.
■<D
-<D
© USER AUTHORIZATION
Set USER AUTHORIZATION to OFF or ON.
Even if USER AUTHORIZATION is set to OFF, host
authorization is necessary to access the pages exclu
sive to your network administrator, or to use the FTP
function {to call the WJ-NT204 transmitter).
The factory default setting is OFF,
© USER REGISTRATION
Set USER NAME, PASSWORD and ACCESS LEVEL.
USER NAME and PASSWORD can be entered with up
to 16 upper or lower case alphanumeric characters
and symbols. Select an ACCESS LEVEL from 1 to 3.
To change an already registered password and access
level, set them in the same way as to register a new
password and access level, and then click the
[SUBMIT] button.
For user authorization, refer to the ACCESS AUTHO
RIZATION on page 105.
@ DELETE USER
Select a registered user and click the [DELETE) button
to delete.
The list of currently registered users can be viewed by
clicking this pulldown list. The number in brackets is
the access level.
88