Model ag-520d unit is shown here, Insert a cassette, Repeat play – Panasonic AG-520D PROLINE User Manual

Page 10: Playback a tape

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playback a Tape

Model AG-520D unit is shown here.

O All connections are made (see page 5).

Q Your Combination VCR is plugged in.

|\jl^Check list before you begin.

Insert a cassette.

• Combination VCR power

comes on automatically.

• Repeat Play begins

automatically if cassette

has no record tab. (See

bottom of this page.)

To prevent tape jam

Inspect your cassette tapes and

remove any loose or peeling labels.

2

PLAY

Press PLAY.

• The Combination VCR will

automatically go into

Repeat Play mode.

To Find a Particular Scene

Forward Search

Press FF

Reverse Search

Press REW

For view Slow Motion ->

Press SLOW

(To release, press SLOW)

For view Still (Freeze) picture

Press PAUSE

(To release, press PAUSE)

For view Frame by Frame picture

Press SLOW in the Still mode

(To release, press PAUSE)

After Combination VCR is in Still or Slow mode for 3 minutes, it
will switch to Stop mode automatically to protect the tape and
the video head.

■ To stop ^

Press STOP

■ To rewind tape

Press REW in stop mode

■ To eject tape

Press STOP/EJECT on the

Combination VCR

Repeat Play

Repeat Play mode begins automatically when PLAY is pressed.

You can set to see your recording over and over.

When PLAY on the remote or Combination VCR

is pressed, the Combination VCR will automatically
go into Repeat Play mode.

• “REPEAT ON" is displayed.

• When a cassette without a record tab is inserted. Repeat Play

begins automatically.

To cancel: Press PLAY in Repeat Play mode.

10

Playback repeats when tape end is reached or unrecorded

portion over 3 seconds is detected.
All function buttons (REW, FF,etc.) are operational during

Repeat Play.

Advertising
This manual is related to the following products: