Panasonic AG-520D PROLINE - Manual (Page 7)

Set up Channel and Auto
Clock Set (TUNER:ON only)
Process of Setup
1^
Language Clock
t=>
Channel
1
or
Display CHANNEL/
CLOCK AUTO SET screen.
Press CH A or CHT .
• If you use a cable box, turn it on and
select PBS station in your time Zone.
2
CHANNE/CLXK AUTO SET
CONNECT ANTENNA CABLE
AND IF YOU USE A CABLE
BOX. TUNE IT TO YOUR
LOCAL PBS CH THEN. . .
PLEASE PUSH CH UP KEY
Start Channel Auto Set
and Clock Auto Set.
Press CH A.
These on-screen displays will appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
When using Auto Clock Set
If you selected Auto Clock Set, the channel auto set appear
automatically. (When Channel Auto Set is complete in above step. Auto
clock Set is performed only.)
Display MAIN MENU.
Press ACTION.
b MAIN MENU
SELECT lA •w M *■ KEY
SET : ACT ION KEY
Display SET CLOCK
screen.
1) Press to select
“CLOCK.”
2) Press ACTION to display.
----------- SET CLOCK ---------------
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST :0
SELECT: A T KEY
SET :► KEY
END :ACTION KEY
7/28/1999 m 12:00PM
OST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END : PUSH CH UP KEY
AUTO CUOO< SET
!S INCOMPLETE
PUSH ACTION TO SET CLOCK
Select AUTO CLOCK SET.
1) Press AW to select.
2) Press ► to start.
These on-screen displays will
appear in sequence.
_ • CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
(Setup completed)
Press CH A to exit.
* If your area observes daylight saving
time, but you would like to turn the
DST feature off, do the Reset Clock
steps on page 33 and set DSTrOFF.
• If your area observes daylight saving
time and DST is set to ON, but the
time is incorrect; do the Time Zone
Adjust steps on page 8.
(Setup incomplete)
See Case 2 on the next page.
IMPORTANT NOTE FOR AUTO
CLOCK SET
• Auto clock set is performed the first
time when Combination VCR is turned
off each day. If used, a cable box must
be left on and tuned to the PBS
channel at the time Combination VCR
power is turned off if you want auto
clock set to be done.
• If using, a DSS receiver, must be
turned off for auto clock set.
• If Cable Box or DSS receiver is
connected to Combination VCR via
AudioA/ideo Jacks, an RF coaxial cable
must also be connected for auto clock
set and channel auto set features.
• If, for any reason, the time is changed
manually, automatic time correction will
not occur.
ACTION Control on the unit
STOP/EJECT REW/t»
You can operate the menu
screen using unit buttons.
To display the menu, press
STOP/EJECT and REW
together with no tape
inserted.
To exit the menu, repeat above with or
without tape inserted.
.^Астюм —
On Unit