Panasonic OMNIVISION PV-8660 - Manual (Page 23)

л (У ь А Таре Operation
Your VCR is equipped with several
time saving features as well as
convenient automatic functions making
tape operation easier than ever.
2
3
Repeat Play
The VCR will play your recording over and over.
1
Press ACTION to display the menu.
2
Press AT to select “SET UP VCR,”
and then press ^ to display the
“SET UP VCR” screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
t DIОМА/LANGUE:ENGLISH
SELECT:* ▼ KEY
SET :► KEY
END :ACTION KEY
Press AT to select “REPEAT
PLAY,” and then press ► to
select “ON” or "OFF.”
• When “ON" is selected, the VCR plays the
tape to its end or until a blank portion of over
30 seconds is detected (erased portions are
not considered blank). The tape is then
rewound and played again and again until
Repeat Play is turned off.
------------SET UP VCR-------------------
BEEPER
NOISY CH BLUE BACK
SELECT:* ▼ KEY
SET :► KEY
END : ACT I ON KEY
OFF
ON
ON
4
Press ACTION twice to return to the
normal screen.
Shuttle Variable Speed Search
The SHUTTLE Ring allows you to smoothly control the tape speed during
special effects playback in both forward or reverse.
A
Turn SHUTTLE Ring on the remote control while in Plav or
Still mode to place the forward or reverse search.
• The more you turn the Ring, the faster the search speed will be.
B Press a function button such as: PLAY, STOP, etc. on
the VCR or remote control to release the Shuttle mode.
• The VCR performs the function of the button pressed.
NOTES
When the SHUTTLE Ring is turned more than half in Stop
mode, normal Fast Fonward or Rewind will begin.
Some noise bars are normal during Shuttle operation.
After 3 minutes in Still or Slow, the VCR will go into Stop mode.
When the SHUTTLE Ring is released, the VCR goes into Still mode.
One Minute Skip
The VCR rapidly skips over one minute of tape.
Press ZERO/1 MIN in Play mode.
• The VCR will go into FF search mode
and skip over 60 seconds of recorded
time. Normal playback will then resume.
Zero Search
To quickly return to a specific tape location.
3 Press DISPLAY to display the Time
Counter overlay during playback.
b
Press COUNTER RESET to reset
the Time Counter to “0:00:00” at the
desired position.
C
Continue playback, rewind,
or fast forward.
d Press ZERO/1 MIN in Stop mode
when you want to return to “0:00:00.”
• The VCR will go into FF or REW mode and
stop at the last point the Time Counter was set to 0:00:00.
STOP 12:00AM ABC
I i:00:30
► STEREO
► SAP
MONO 4
SP
STOP 12:00AM ABC
0 : 00:00
► STEREO SP
►SAP
MONO •*
23