Panasonic OMNIVISION PV-8660 - Manual (Page 25)

Important for Program Index Search:
Timer recordings must be
recorded back to back in order for
them to be placed on the Program
Index list, if a timer recording is
foiiowed by a function, such as
REW or PLAY, the data is lost.
Program Index Search
(For timer recordings only)
This feature allows you to choose a timer recorded program from a
Program Index list and then start a search for that program.
Once the tape is ejected or normal recording is started, all program
Index data are deleted.
1/ 4
1/ 7
1
Press INDEX to display the “SELECT
SEARCH MODE” screen.
2
Press AW to select “PROGRAM
INDEX SEARCH,” and then press ►
to display the “PROGRAM INDEX”
screen.
3
Press AW to select the desired
recorded program, and then
press ► to start the forward or
rewind search.
• When the designated program is reached,
the VCR automatically goes into Playback
mode.
Index Scan
(For normal and/or timer recordings)
This feature allows you to scan (forward or reverse)
each recording for 10 seconds in Playback mode.
3 Press INDEX to display the
“SELECT SEARCH MODE” screen.
SELECT SEARCH MODE
INDEX SEARCH
ammilssEsa
PROGRAM INDEX
DATE START CATEGORY
12/28 1O:00A SPORTS ABCD
12:30P MOVIE NBC
8:OOP COMEDY CBC
3;OOP MUSIC NBC
SELECT:* T KEY
SEARCH:► KEY
END ;INDEX KEY
This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
b Press A W \ o select “INDEX
SEARCH,” and then press ►
to display the “INDEX” screen.
C Press REW or FF to begin the scan.
• As each index mark is reached,
a short playback will be performed
after which FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
• You may also press STOP to stop the tape.
start here
SELECT SEARCH MOOE
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET :► KEY
END ;INDEX KEY
I
1 Current 1 Program
|-| REW|k- Press -*f FF 'f- -«V--------
1
m ------ !
I
STOP
t Indexed Point
■m- Play (for about 10 seconds)
— Fast Forward or Rewind
stop !
25