3 select “line" input mode on the, To monitor dubbing on your tv, Cog2jng^j^21ìlj^ese2ilbsìiìsl – Panasonic OMNIVISION PV-8660 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
" i§g
Cog2jng^J^21ìLj^ESe2ilbSÌiìSl
Connections you'll need to make. (Choose front or rear connection.)
• When connecting to a normal VCR, use the L Audio In jack for proper sound reproduction.
Playing (Source) VCR
Recording (Editing) VCR
TV for Monitoring
1
Insert a pre-recorded
tape into the Playing
(Source) VCR.
2
Insert a blank tape with
record tab into the
Recording (Editing) VCR.
h <L.
JP
3
Select “LINE" Input mode on the
Recording (Editing) VCR. (See “Selecting
the Input Mode” on page 17.)
4
Press PLAY on the Playing VCR.
Press PAUSE at the desired starting point.
Press REC on the Recording VCR, and then
press PAUSE immediately thereafter.
6
Press PAUSE on both VCRs at the same
time, to begin copying.
To Edit Out Unwanted Parts
Press PAUSE on the recording VCR while copying is
in progress. Press PAUSE again to resume copying.
7
Press STOP on both VCRs to stop coovina.
To Monitor Dubbing on Your TV
1 Turn your TV on and tune to the Recording
VCR channel (CH3 or CH4).
2 Set the VCR/TV Selector on the Recording
VCR to “VCR."
Caution:
Unauthorized exchanging and/or copying of copyrighted
recordings may be copyright infringement.
34