Preparation, Operations, H search for the end of the previous * recording – Panasonic NVSD200BA User Manual
Page 13: 2 press pause/still at the end point, Precautions, Assembly editing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
On-the -spot Recording
Assembly Editing
This function can be used to make up an edited tape from
other recordings or video sources.
This enables you to record a new segment immediately
after a previously recorded segment.
AUDIO/VIDEOIN
1
Preparation
•Connect a movie camera or another VTR to this VTR as
shown.
•Insert a recorded cassette tape with an intact erasure
prevention tab.
•Select the video source required by pressing v A to set
AV.
2
-cn
3
□□ REC
> REC-
4
Operations
o-
• REC
,1 PAUSE/
" STILL
o
H Search for the end of the previous
* recording.
PLAY
2 Press PAUSE/STiLL at the end point.
„ PAUSE/
" STILL
O
3
Set for the new recording by pressing
REC.
Start the new recording by pressing
PAUSE/STILL again.
13