Remote controller will not work correctly – Panasonic NVSD200BA User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Remote controller will not work correctly
SYMPTOM
CAUSE
REMEDY
CHECKED
Remote controller
does not operate
correctly.
Remote controller transmitter
beam is not reaching VTR.
Ensure that remote controller is being pointed at VTR
and that transmitter beam is not obstructed.
Distance is too far.
Use remote controller within 7 m of VTR. If this range
is not possible, replace batteries.
Batteries are exhausted.
Replace batteries. Note precautions for replacement
on page 9.
Batteries are incorrectly fitted
with (4-/-) reversed.
Fit batteries correctly as shown on page 9.
18
Advertising