Settings using the on screen dispiay, Preparations, 6) coiour system indicator – Panasonic NV-SJ200 User Manual
Page 13: Picture mode indicator, Note, To set the colour tv system, Language setting of the on screen display
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settings Using the On Screen Dispiay
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
To Make Various Indicators Appear On
Screen Display
At a press of the OSD button 0,
the following indications appear
on the TV screen.
• Press the OSD button 0
again to make the on
screen display disappear.
(T) Programme position
© Tape running dispiay
Stop, Eject
Rewind, Review
MM
Fast Fonward, Cue
►►
Playback
►
Still playback
II
Recording
•
Recording pause
!!•
Slow playback
!►
Repeat playback
R ►
Present time/Tape counter/Remaining tape time/Dew/
Index Search/OTR indication/Play-OffTimer
Information
Display
Present time
17:24
Tape counter
-2:35.47
Remaining tape time
REMAIN 2:34
Dew
DEW
Index Search
SOI
OTR indication
OTR 60
Play-Off Timer
OFFS 60
(4) Tape speed indicator (SP/LP/EP)
® Cassette-in indicator
(6) Coiour system indicator
Any selected colour TV system except “AUTO" appears
on screen display. (See the To Set the Colour TV System
on this page.)
® Picture mode indicator
At each press of the PICTURE MODE button 0, the
selected picture mode is set and following picture mode
—sJodicators appear.
ySTANDÂRÜ^ For TV Programme recorded
DYNAMIC;
SOFT:
CARTOON:
For Scenery, Sports
For Rental soft tape
For Cartoon
Note:
• The on screen display may be disturbed or disappear
during special playback.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR.
To Set the Colour TV System
1 Press the MENU button © to
,—
display the Main menu on
the TV screen.
2 Press the Cursor buttons
(A V)
0
■' ■
m m fm
to select “SYSTEM" then press the
ENTER button 0.
3 Press the Cursor buttons (A ▼) © to select “AUTO”.
• The VCR automatically distinguishes between "PAL” or
“NTSC" signals. If the picture lacks colour during AV
external recording or playback, set to “PAL" or "NTSC”.
• When you want to record or play back in black and
white, set to “B/W".
4 Press the MENU button 0 twice to exit the On Screen
Display.
§
CO
13