Panasonic NV-SJ200 - Manual (Page 9)

storing TV Broadcasts in Your VCR
The VCR is fitted with its own tuner Oust like a normal TV)
and can be preset to receive up to 99 TV broadcast stations.
Pre-programmed TV Channels (Australia only)
The locai TV broadcast channeis 2,7,9,10 and 28 are
factory-preset in this VCR.
That is, if you can receive television broadcasts on VHF
channels 2, 7, 9, 10 and UHF channel 28, these are already
tuned on the programme positions with the matching
numbers. However, it is possible to cancel these settings and
tune the local TV broadcast channels to any desired
programme position.
Before Auto Tuning Using the On Screen
Display (New Zealand only)
When you use this VCR in New Zealand, need to operate as
follows:
Preparations
• Confirm that the VCR Is on.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Set the VCR/TV switch © is set to “VCR”.
Operations
1 Press the MENU button © to
display the Main menu on
the TV screen.
Press the Cursor buttons ( A V ) ©
to select “TUNER PRESET” then
press the ENTER button ©.
Press the Cursor buttons ( A T ) ©
to select “COUNTRY" then press
the Cursor buttons {◄ ►) © to
select “NEW ZEALAND".
Auto Tuning Using the On Screen Display
introduction
The VCR is tuned automatically by Plug in Auto Tuning.
However, Auto Tuning using the On Screen Display should
be performed according to the following method if necessary.
Preparations
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Turn on the VCR and select any programme position
except AV.
Operations
1 Press the MENU button © to
display the Main menu on the
TV screen.
Press the Cursor buttons ( A T ) ©
to select TUNER PRESEr then
press the ENTER button ©.
Press the Cursor buttons ( A T ) ©
to select “AUTO TUNE” then press
the Cursor buttons (◄ ►) © to
start the Auto Tuning.
• When Auto Tuning is completed,
the On Screen Display
disappears and programme
position 1 is selected.
The number displayed here is
the number of channels still
to be auto tuned.
Channels that can be Received
VHF
AUSTRALIA 0-12 45-470MHZ 28-69
NEW ZEALAND 1-11 45-470MHZ 21-69
Proceed to the step 3 on the right side to start the Auto
Tuning.
• No need to operate the steps 1-2 of Auto Tuning Using
the On Screen Dispiay.
Notes:
• Auto Tuning searches for TV stations from VHF minimum to
UHF maximum and memorizes every tuned programme
position. Other programme positions are skipped.
• Auto Tuning takes five or more minutes to complete its
search.
• If the VCR is not correctly tuned by Auto Tuning, follow the
procedure on'the next page.