Panasonic NV-SJ200 - Manual (Page 21)

Weekly Timer Recording
In step 3 of 4-Key Programming, select the desired day by
pressing the DATE — button
For example, SU (Sunday)
CH DATE OM OFF
i SU - -- ----
□ i
(SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,
TH=Thursday, FR=Friday, SA=Saturday)
Daily Timer Recording
For this timer function, several groups of days can be
selected.
(A) Daily recording from Monday to Friday (MO-FR)
(B) Daily recording from Monday to Saturday (MO-SA)
© Daily recording from Sunday to Saturday (SU-SA)
in step 3 of 4-Key Programming, select the desired days by
pressing the DATE — button
For example, ©
m
TIWFHPHOGRAMMC
date on off 2 SU^A
a
Timer Recording from an External Signal
Source
If timer recording is performed by a unit connected to the
AudioA/ideo input sockets, select the AV indicator in step 2 of
4-Key Programming for the programme position,
TIMER PROCRAMME
I CH DATE ON O f f
AV - -........ IP
a a
1 l
Setting other Programmes in Succession
Repeat steps 1-7 of 4-Key Programming.
Programming aTimer Recording of aTV
Programme Until its End
(Tape Speed Auto Change Function)
If the VCR determines that the remaining tape time is
insufficient to record the programme to its end during a timer
recording performed in the SP mode, this function
automatically changes the tape speed to ensure that the
whole programme will be recorded.
The tape speed will change as follows.
NTSC system; SP —5> EP
RAL system: SP —> LP
• This function cannot change the recording speed to the
EP mode for PAL system.
Depending on the remaining tape length, recording may be
performed in the LP (EP) mode from the start. However, if the
remaining tape time is still not sufficient in this case, the
programme cannot be recorded to the end.
Example of RAL system (Remaining Tape Time 60 min.):
End of Tape
I 30 min. I 30 min.
Video
Tape
Timer ' I-,, “-r.;':..'.;
Programming 1st Programme
(30 min.) L _________
\
\
2nd 30 min. Recording
by SP mode
15 min. Recording
by SP mode
30min. Recording
by LP mode 3rd Programme will
not be recorded,
• The tape length must be set correctly. (See page 14.)
• Some tapes may not work correctly.
To Activate the Tape Speed Auto Change Function;
Press the SPEED button to select "A".
TiMEfiPROORAMMfc
CH date : on off
2 27TH 20 02 21 A
a a a i
Every time you press the SPEED button the indication
changes in the following order:
NTSC system;
RAL system:
SP —> EP
--------- A <-------
CO
5
Cb
§
8
C
I
SP LP -
---------- A <-
EP □
21