Setting the dialing method (tone or pulse) – Panasonic Panafax UF-121 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Dialing Method (Tone or Pulse)
Your machine can operate with either of two dialing methods (Tone or Pulse), de
pending on the type of telephone line you are connected to. Your machine is preset
at the factory for Pulse (Rotary) Dialing. If your machine requires Tone Dialing, set
to Tone Dialing using the following procetiure.
Enter the Fax Parameter number.
as
07
( 2 1
2
07
( 2 1 1
To return the dialing method to Pulse
Dialing,
07
[
2
]
2
To store the new setting.
START
NOT€
To return to standby, press I STO
p
1 .
The number on the left corner of the display indicates the Fax Parameter number.
The number inside the brackets is the standard setting value and the number blink
ing on the right corner is the current setting.
Pulse Dialing must not be used in N.Z.
15
Ш