Tps operation (tape program search), U. u, Notes on cassette tapes – Panasonic CQR255SEUC User Manual
Page 15: J rp e, Tape, Tppe, Tflpf‘u.ui, 7rpe
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
or
TPS Operation (Tape Program
Search)
® Press 3 (TPS) to activate the tape program search mode.
I ro
J RP E ‘
u. u
0
. From the current selection, decide which program you want to seiect.
Now, press several times forward (up to 9 programs) or press
several times backward (up to
8
) to select the corresponding
program number.
(Fast forward:)
1
................^9
(Rewind:)
0------------ ►S
t________ >
EX1. To select the current program again
press 3 (TPS), and press
once.
EX2. To select the 1 st program backward
of the current selection, press 3
(TPS)
once,
and
press
two
times.
EX3. To seiect the next program, press 3
(TPS) and press once.
Ir3
TAPE*
u. u
0
ira
TPPE*
U . U I
ira
TflPf‘u.uI
EX4, To select the 3rd program forward of
the current selection, press 3 (TPS)
once, and press “►►"three times.
® To turn it off, press 3 (TPS) again.
ira
7RPE*
u. u
Note:
The TPS mode may not work correctiy in the foiiowing cases. This, however, does not mean that the unit
is defective.
• There is an interval less than 4 seconds or having a high ievei of noise or hum between programs.
• There is particularly low-level passage during the program.
Notes on Cassette Tapes
Tape Slack:
Use a pencil or similar object to take up the slack as
shown. If a loose tape is used, this may result in the
tape becoming tangled in the rotating parts of the
unit.
CQ-R255SEUC
15