Clock basics, Initial time setting, Resetting the time – Panasonic CQR255SEUC User Manual
Page 18: Selecting the clock display, S is, The clock system is 12-hours.)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clock Basics
(The clock system is 12-hours.)
\
/
_ 1
pan
r-Mu
' 1 '
\
1 /
ЭПЛ
___ J TUU
\ t /
S IS
Initial Time Setting
® Press and hold © for more than 2 seconds.
“AdJ” is displayed.
(D Press and hold 0 again for more than
2
seconds. “
1 2
" blinks indicating the time set
ting mode is activated.
© To set hours, press or “<”.
® Press again
0
for minute setting.
® To set minutes, press or
Hold or to change numbers rapidly.
© When you have set the time, press
0
Resetting the Time
When you want to reset the time, press and hold ® for more than 2
seconds to activate the time setting mode. Then, repeat step © to ©
above.
Selecting the Clock Display
Press and hold © for more than
2
seconds for clock display.
Press
0
once again, the current audio display mode resumes.
When power is turned off while the time is displayed, the clock mode
remains on. When the PWR is pressed again, the system is com
pletely off.
Note: Before you leave your car that has no ACC, be sure to switch
power off.
18
CQ-R255SEUC