H power and sound controls, Power, Volume – Panasonic CQR255SEUC User Manual
Page 8: Mute
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
H Power and Sound Controls
Power
If the car is not already running, turn the key in the ignition until the
accessory indicator lights.
Press PWR to switch on the power.
Notes:
• When a cassette is inserted with all power connected, the unit power
will automatically turn on and tape loading begins and plays.
• When power is turned off while the time is displayed, the clock mode
remains on. When the PWR is pressed again, the system is complete
ly off.
Before you leave your car that has no ACC, be sure to switch power
off.
Volume
• Press “/X" or
to increase or decrease volume.
1
tn
1
-1
n
LMJ L
■3U
-Volume Level
0 to 39
• Press or for more than 0.5 second to change numeric lev
els on the display rapidly.
Mute
• Press M/S (MUTE/S.HDB) to decrease Volume level.
• “MUTE” blinks while this operation.
------- II
lhij
' Press M/S (MUTE/S.HDB) again to cancel.
Note: This unit is equipped with an anti-volume-blast circuit which serves as an automatic volume level
adjuster so that you will not be deafened with sudden loud volume.
This system operates as follows. When PWR is switched on, the volume level is low. After that, the vol
ume level gradually returns to its previous level prior to switching off the unit.
CQ-R255SEUC