Panasonic NV-SD250 - Manual (Page 15)

storing TV Broadcasts
into your VTR
Setting the Clock of the VTR
Storing TV Broadcasts into your VTR
Introduction
The VTR is fitted with its own tuner (just like a normal TV
set) and can be pre-set to receive up to 42 TV broadcast
stations.
Preparations
•Confirm that the TV is on and the VTR viewing channel is
selected.
•Turn on the VTR and select the programme position
except AV.
• Press VTR/TV to select the VTR mode.
(Only forNV-SD250EA.)
Auto Tuning Procedure
Operations
PRE-PROGRAMMED TV CHANNELS
(NV-SD250A)
The local TV transmission channels 2, 7, 9 and 10
are factory-preset in this VTR. That is, if you can
receive television broadcasts on VHP channels 2, 7,
9 and 10, these are already tuned on the programme
positions with the matching numbers.
However, it is possible to cancel these presettings
and tune the local TV broadcast channels on any
desired programme positions.
For alternative settings and tuning of additional TV
broadcasts channels, follow the Tuning Operations.
On Screen Display
1
r
Q
OSO MENU
•LANGUAGE
CLOCK SET
TUNER PRESET
G-COOBCH SET
BLUE BACK
DEMONSTRATION
SELECT :QB, ENTER END .mm
Press MENU.
0
Q
OSO MENU
LANGUAGE
CLOCK SET
•TUNER PRESET
G^ODECH SET
BLUE BACK
DEMONSTRATION
Select TUNER PRESET.
0
0 ■'AUTOTUNe.'
iEAKCH’"
FIN
§
СЛ
.c
CD
CO
Select AUTO TUNE and
press ◄ or ►.
•When the Auto Tuning finished. On
Screen Display disappears and
programme'position 1 is selected.
Notes:
•The Auto Tuning is searching for TV station from VHP
minimum to UHF maximum and memorizing the data for
every programme position. The other programme
positions are skipped.
• The Auto Tuning takes seven or more minutes to
complete the search.
• If VTR is not correctly tuned by Auto Tuning, follow the
procedure on next page.
15