Panasonic NV-SD250 - Manual (Page 27)

Before Requesting Service
Other Functions
Before Requesting Service
Before requesting service, check the following points once again.
Message of On Screen Display
Message of On Screen Display is displayed.
MESSAGE CAUSE REMEDY
PLEASE PUT IN
A VID EO c :a ss e tte
REC is pressed without
cassette. Put in a video cassette.
PLEASE STOP THE TAPE. TUNER PRESETis selected
during playback. Stop the tape.
PLEASE SET THE CLOCK PROGRAM is pressed when
the clock is not set. Set the clock.
PLEA SE US E A C ASS ETTE
W fTH TAB
REC is pressed without tab of
Cassette, Use a cassette with tab.
NO riM EP RECORDING
HAS BEEN SET
TIMER REC is pressed with
no timer programmes.
Set timer recording.
TIMER PROGRAMMES ARE
FU LL.
G-CODE is pressed when
8 programmes have been
already set.
Cancel unneccessary programme.
VTRiS IN THE TIMER
STANDBY MODE.
POWER is pressed during
timer standby mode. Press’TIMER REC to release from timer standby mode.
D EW FO R M E D IN TH E VTR.* Dew forms. Wait until the message disappears.
-Only for NV^SD250A,
Self Test Indication
This VTR has a self-diagnosis and display function. If the VTR detects trouble during installation or during use, the following
indications automatically appear in the VTR display, indications are displayed in the form of a single English letter plus two
numbers such as [HOI],
INDICATION CAUSE REMEDY
U 1 0* Dew forms. Wait until the indication disappears.
HD □ Some trouble has occurred.
(Numbers following H and F
differ according to the status
of the VTR.) Consult your dealer for further advice.
FDD
c
5
•Only for NV-SD250A.
27