Other functions, Automatic playback, Vtr-off playback – Panasonic NV-SD250 User Manual
Page 26: Automatic rewinding, Automatic switching off and ejection, Ntsc playback, A note about ntsc playback on pal tv function, Preparations, 1 press menu, 2 select blue back
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
other Functions
Automatic playback
When a cassette without an erasure prevention tab is
inserted, the VTR starts playback automatically.
VTR-off playback
When the VTR is off, an inserted cassette can be played
back by pressing PLAY.
Automatic rewinding
When the tape reaches its end during recording (except for
timer recording) or playback, it will automatically be
rewound to the beginning.
Automatic switching off and ejection
When the VTR is switched off, an inserted cassette can be
ejected simply by pressing EJECT. The VTR will eject the
cassette and automatically turn itself off again.
NTSC Playback
Tapes recorded in the NTSC system can be played back
with this VTR via a PAL system TV set.
A note about NTSC playback on PAL TV function
On some TVs, the playback picture may roll up or down:
adjust this using the V-HOLD control on the TV. TVs not
equipped with a V-HOLD control cannot correct this
condition. The playback picture will shrink vertically, and
black bars will appear both on the top and bottom of the
screen. This is not an indication of a malfunction.
• During Cue, Review, Still or Slow playback, the picture
may not be in colour.
• Recording in the NTSC system is not possible with this
VTR.
•This function is designed only to allow the playback of
tapes recorded by NTSC signals on a PAL system TV.
The NTSC signal is not completely converted to a PAL
signal. For this reason, images played back by this
function cannot be recorded on another VTR.
Preparations
• Confirm that the TV is on and the VTR viewing channel is
selected.
•Turn on the VTR.
• Press VTR/TV to select the VTR mode.
(Only for NV-SD250EA.)
When BLUE BACK is ON, the screen will always have a
blue background when no signal is received or the received
signal is very weak.
1 Press MENU
Q
MENU
2 Select BLUE BACK.
0
0
^ Q
3 Select ON.
0
0
On Screen Display
OSOUBAJ
LANGUAGE
CLOCK SET
TUHEtl PRE%T
O-CODECHSET
«SLUESACK
DSHONSTMTtON
SEL£CT
:SO,ENTER
END ^ENU
BLUE SACK
SELECT
;ISa
END AIENU
• When BLUE BACK is OFF, the blue background
function does not work.
• It is not possible to record the blue picture of the blue
background function.
After Setting is selected
Press MENU twice to make On Screen Display disappear.
Q
MENU
26