Input signal selector (ag-7350 only), Sync selector, Tv system selector – Panasonic AG7150 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. INPUT Signal Selector (AG-7350 only)
Used to select video input signal to be recorded.
S-VIDEO: To record video signal through the S-VIDEO IN
Connector.
LINE:
To record video signal through the VIDEO IN
Connector.
S-VIDECI"^ ▲
une
I
b
I i
INPUT
SYNC Selector
Select the synchronizing signal.
3
CO
AG-7350
AG-7150
EXT:
To synchronize to the external composite sync
signal transmitted through the EXIT SYNC IN
Connector during playback or recording.
NORM:
To synchronize to the video input signal transmitted
from the VIDEO IN Connector. (If there is no video
input signal, the “INT” mode will be selected.)
INT:
To synchronize to the internal oscillator built in this
unit. (During recording, it will be automatically
synchronized to the video input signal.)
EXT
SYNC
SYNC
When setting to “EXT", be sure to input an external com
posite sync signal.
10. TV SYSTEM Selector
Used to select the 3 VMS system.
PAL:
CCIR:
NTSC
4.43:
To playback or record by PAL system.
To playback or record by CCIR system. (S-VHS
recording can not be made.)
To playback tapes recorded by NTSC system.
(Recording cannot be performed.)
4,43
TV SYSTEM
PAL and CCIR systems can not be distinguished automat
ically.
If REC and PLAY Buttons are pressed simultaneously when
this selector is set to “NTSC 4.43”, the unit will automatically
go into playback mode.
13