Time code, Set the selectors, Connections – Panasonic AG7150 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Time Code
The SMPTE time code signal recorded onto the tape by using a time code generator/reader permits absolute addressing (the
identification of storage iocations by actual addresses). The time code signal will be recorded on audio CH2 track.
Set the selectors.
CH2 METER Selector
AUDIO CH2
(ON-SCREEN)
“CH2"
(AG-7350
only)
(Refer to page
11
.)
“TIME CODE”
(Refer to pages 38 to 40.)
When the time code signal has
been entered. (AG-7350 only)
■ The AUDIO CH2 LEVEL meter indicates near 0.
■ Time code signals are recorded during recording and dub
bing (including audio dubbing on channel 2).
Refer to the operating instructions of the SMPTE time code
generator/reader you are using for details.
Connections
■■'fm
a>
■D
О
Ü
о
E
Note
The unit’s tape counter does not count the time code signals, but the control (CTL) signals recorded onto the tape.
Connect the time code generator/reader to the unit to read the addresses of the time code signal.
33