Panasonic EW3122 - Manual (Page 12)

SEHING (CHECKING) THE MEASUREMENT NOTIFICATION TIME
( continued )
I S-3D
on
oFF
6
oFF
6
On/Off
»art
6
©Press the Set button "1". The minute value will
blink.
@ Press the Change button "2" repeatedly to set
the desired minute.
• To set only Notification Time 1, press the
On/Off Start button to complete the setting.
• To set Notification Times 2 and 3, follow steps
6 and 7 below.
Press the Set button "1". Notification Time 2 will
blink. Repeat steps 2 to 5 to set the desired
notification time.
When setting of Notification Time 2 has been
completed, press the Set button "1". Notification
Time 3 will blink. Repeat steps 2 to 5 to set the
desired notification time.
8
When setting of Notification Time 3 has been
completed, press the Set button "1". The times
set for Notification Times 1 to 3 will be shown
automatically at 2 second intervals.
To complete the setting, press the On/Off Start
button.
To change the notification time setting:
<1 Press the Set button "1" on the top surface of the blood pressure
* monitor. (Notification Time 1 will blink.)
• To change the setting for Notification Time 2 or 3, press the Change
button to display Notification Time 2 or 3.
2 Press the Set button "1" twice. The hour value will blink.
3 Press the Change button "2" repeatedly to set the desired hour.
4
5
SETTING (CHECKING) THE MEASUREMENT NOTIFICATION TIME
( continued )
© Press the Set button "1". The minute value will blink.
® Press the Change button "2" repeatedly to set the desired minute.
Press the On/Off Start button to complete the setting.
To cancel the measurement notification sound:
1
2
3
4
Press the Set button "1" on the top surface of the blood pressure
monitor. (Notification Time 1 will blink.)
• To change the setting for Notification Time 2 or 3, press the Change
button "2" to display Notification Time 2 or 3.
Press the Set button "1" once. The 4^ and on will blink.
Press the Change button "2". oFF will be displayed.
Press the On/Off Start button to complete the setting.
When the set time is reached, the measurement notification sound will
sound to notify you that it's time to take a measurement.
If the set time is reached in the middle of taking a measurement, the
measurement notification sound will not sound.
When the measurement notification sound sounds. It can be stopped by
pressing the On/Off Start button. If the button is not pressed, the sound
stops after 1 minute.
If you store it in a desk, you may not be able to hear the indicator sound.
Advice:
If a record table is made out with the measurement values taken around the
same time, you can easily see your own daily blood pressure changes.
21 22