Panasonic TU-IRD10 - Manual (Page 30)

MORE FEATURES
ALT AUD Remote Button
Temporary audio selections are made by pressing ALT AUD on
the remòte. All the available audio types are selected one after
another as you continue pressing the ALT AUD button. Once
selected, the chosen audio remains selected until it is changed
or until the satellite receiver is turned off.
Alternate Audio Display Screen
When you select Alternate Audio from the Preferences menu,
the Alternate Audio display screen comes up.
Point to an audio language, and press MENU/SELECT. A check
mark next to a language option means you have selected that
language. The satellite system will then automatically set the
audio program to the selected audio program type when that
type is available.
Picture Size
The Picture size display screen allows you to choose between a
standard TV screen and a Cinema option. A standard TV screen
has an aspect ratio of 4:3; the Cinema option has an aspect
ratio of 16:9.
System Test
The System Test display screen is accessed through the Options
menu, and allows you to initiate diagnostic procedures on the
satellite system. You should use this feature to get your Access
Card dumber, or when your recelverdoesn't seem to be working
correctly. There are four separate tests: signal, tuning, phone
connection, and access card.
A message'screen appears, telling you whether the system
passed each test. If your system fails a test, run the system test
several times before concluding that there ,is a problem.
Occasional fluctuations in the phone line or satellite signal can
give temporary false failure readings.
Regarding Picture Size...
You should only use the Cinema option
if you have a wide screen TV; using the
Cinema option on a standard TV screen
could crop the picture.
26