Connection c, Good picture and sound quality, To connect tv, vcr, and antenna or cable box – Panasonic TU-IRD10 User Manual
Page 38: To receive dss® programming, To receive off-air programming (no cable box), To receive cable programming (with cable box), To record dss® programming, To view vcr programming, Connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
Connection C
Good Picture and Sound Quality
To use this connection you must have:
•
TV with RF input (jack)
•
VCR with RF and audip/video inputs
•
Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box.
1. Connect coaxial cables and audio/video cables as shown.
To receive DSS® programming:
•
Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
To receive off-air programming (no cable box):
1. Turn off VCR and satellite receiver.
2.
Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and satellite receiver.
2.
Tune TV to cable box output channel (usually CH2, CH3,
or CH4).
3.
Tune cable box to desired channel.
To record DSS® programming:
1. Tune TV to the channel on which you receive the DSS®
signal.
2.
Tune satellite receiver to desired channel.
3.
Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2.
Turn satellite receiver off.
CAUTION
Do not stack electronic components
or other objects on top of the DSS
Receiver.
The
slots
on
top
of
the
receiver
must
be
left
uncovered
to
allow
proper
airflow
to
the
unit.
Blocking the airflow to the unit could
impair
performance
or
damage
your
receiver and other components.
Do not stack the DSS receiver on top
of a "hot component" such as an audio
power amplifier.
34