Panasonic KX-P3626 - Manual (Page 30)

Irntial
©san?) 0ÌÌM5
c
M
5'
(O
(D
CO
(D
C
TJ
(A
3T
Menu Item Setting Description
INSTALL AGM/IBM OFF* Sets Alternate Graphics mode (selects
(Alternate
Graphics Mode) ON Epson graphics) to on or off in the IBM
mode. (This setting is effective only in the
IBM mode.)
AUTO CR/IBM OFF*
ON Activates (ON) or deactivates (OFF)
Automatic CR on LF, VT, ESC+“J”.
(This setting is effective only in the IBM
mode.)
AUTO LF OFF*
ON Activates (ON) or deactivates (OFF)
Automatic LF after CR.
BUZZER OFF
ON*
Buzzer sounds (ON) or doesn’t sound (OFF).
AUTO LOADING OFF
ON* Setting to ON automatically loads a single
sheet or envelope to the first print line.
[This setting is inoperative when using the
optional Cut Sheet Feeder (KX-P38)].
PAPER OUT OFF Paper Out Detector is active (ON) or ignored
DETECT ON* (OFF).
SUPER QUIET OFF* Reduces (ON) or doesn’t reduce (OFF) the
MODE ON printing noise.
REVERSE OFF* Setting to ON enables the reverse feeding in
LF/PULL ON bottom and front feed.
TEAR OFF MANUAL*
AUTO
When set to MANUAL, the paper’s
perforation doesn’t advance to the tear off
position unless you press the (TEAR OFFl.
Setting to AUTO advances the paper’s
perforation to the tear off position
automatically.
CSF MODE OFF*
ON [This setting is operational when using the
optional Cut Sheet Feeder (KX-P38)].
DOWNLOAD OFF*
ON Setting to ON allows you to download (user-
defined) special characters and setting to
OFF allows you to send more data to your
printer’s buffer, thereby freeing up your
computer.
AUTO ON LINE OFF
ON*
Setting to ON enables the printer to
automatically enter ON LINE mode after
installing paper.
denotes setting when shipped from factory.
30