Panasonic COLOUR TELEVISION CT-32G2 - Manual (Page 20)

Channel Caption
This feature allows you to enter the call names of up to 30
stations into memory (using up to 4 characters for each
station). The call name will then display along with the
channel number when changing channels or pressing
RECALL.
Helpful Hints:
When the Maximum amount of station identifiers are
entered, “FULL” will be displayed in the caption
position.
4.
5.
6 .
Channel Caption
(Station Identifier)
1 . Press ACTION .
2. Press or^^ and or ^ to highlight the Channel
Caption Icon.
O»
3. Press action to display the Channel Caption Menu.
rCHANNElfCARJtONl
ENTER CHANNEL NUMBER
ENTER aapsecs
eHANNEt!
7.
8 .
Press or or use the Remote Control Keypad to
enter the channel number you wish to assign a Station
Identifier.
Press ^ to highlight ENTER CAPTION.
Press ^ or ^ to select first character in Station
Identifier. Then press W to move cursor to the second
position and repeat until the complete Station Identifier
is entered (up to 4 characters).
Press A or to highlight ENTER CHANNEL
NUMBER. Then repeat steps 4 through 6 to continue
adding Channel Station Identifier(s).
CD
Press
action
twice to exit menus.
NOTE: To delete a Channel Caption (Station Identifier) from
memory all four character positions in the “ENTER
CAPTION” area must display a dash mark {-).
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60 or 90
minutes. Display will flash 3,2 and 1 to indicate the last three
remaining minutes prior to turn off. The Recall display will
also appear.
NOTE: This feature will be disabled when Auto Power
On is activated.
<o
1. Press
action _
2. Press ^^or^^ and*^or^* to highlight the Timer Icon.
CD
3. Press
action
to display the Timer Control Menu.
mMERCONTROffl
SLEEP TIMER" ■ NO V ■
oo g oo ■■ ■ ■
: @
m -
4. Press ^ to select NO, 30, 60 or 90 minutes (Sleep
Timer will be activated).
CD
5. Press
action
twice to exit menus.
NOTE: To deactivate Sleep Timer repeat steps 1 through 4.
In step 4 select “NO” instead of minutes.
HelpfulHinfs:
Press the RECALL button to display the remaining
minutes for Sleep Timer, the status will display in the
bottom left corner.
-
20
-