Panasonic COLOUR TELEVISION CT-32G2 - Manual (Page 22)

Set-Up Features
Set Time
Clock (when set) will display on screen at initial ‘Turn On",
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
O
1 _ Press ACTION .
2. Press A orW and ^ or ^ to highlight the Set-Up
Icon.
O
3. Press
action
to display the Set-Up Menu.
to set hours (set AM/PM accordingly).
5. Press to select minutes position.
repeatedly to set minutes.
4. Press^^or^
6. Press or^
O»
7. Press
action
twice to exit menus.
Antenna (Ant)
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Receiver is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Receiver is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
NOTE: This feature is disabled when Game Guard
Lock is activated.
O
1. Press
action
.
2. Press ^or^ and or ^ to highlight the Set-Up
Icon.
O
3. Press
action
to display the Set-Up Menu.
4. Press ^ to highlight ANT.
5. Press or ^ to select TV or CABLE.
O
6. Press
action
twice to exit menus.
Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
NOTE: This feature is disabled when Game Guard
Lock is activated.
1. Press
action _
2. Press ^orW and or ^ to highlight the Set-Up
Icon.
O»
3. Press
action
to display the Set-Up Menu.
rSET4.UF¿
iMÁÑUA'gPROG'^" N0’^':
SuTb.RdwER.oN
SÍ3^^^1?! s ^ESPANOL" o ^.FRAÑGAIS ■ ".-.■■r:;
4. Press ^ to highlight AUTO PROG.
5. Press*^or^to startAutoProgramming.Channels
will automatically advance until all channels have
been scanned.
CZ>
6. Press
action
twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-
22
-