Panasonic CF-18 - Manual (Page 12)

First-time Operation
/ note )-
If “Yes, make this computer a member of the following domain” is selected,
the following message may be displayed: [An invalid domain was specified.
Would you like to proceed for now and try joining a domain later?]. In this
case, select [Yes]. After selecting [Yes], the computer will restart automati­
cally, but sometimes the [Starting Windows] message will remain on the screen,
and windows will not start up. If this happens, hold (ТаЮ down while
pressing
СШ) until [Network Identification Wizard] is displayed on top, and
follow the instructions on the screen.
@ Enter your administrator password and select;
If [Windows XP is currently configured to manage the Intel(R) PRO/Wircless
LAN adaptor.] is displayed, select [Yes].
8
Calibrate the touchscreen.
tWind^2000l
(T) Select [Start] - [Settings] - [Control Panel] - [Mouse] - [TouchScreen] - [Calibration].
@ Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
After the calibration procedure is executed (c.g., after the nine “+” marks arc
touched), the procedure ends when C Enter:) is pressed.
© Select [OK],
tWindo^XRi
© Select [Start] - [Control Panel] - [Printers and Other Hardware] - [Mouse] -
[TouchScreen] - [Calibration].
g Touch the “+” mark on the calibration screen with the stylus (included) for about one second.
After the calibration procedure is executed (e.g., after the nine “+” marks arc
touched), the procedure ends when (Enter) is pressed.
© Select [OK].
(Windoi^XRi
Create a new account.
© Select [Start] - [Control Panel] - [User Accounts] - [Create a new account].
© Enter a name for the new account, then select [Next],
© Select [Computer administrator], then select [Create Account],
© <When you want to create a password for the new account>
Select the new account you have created and select [Create a password].
Follow the instructions on the screen to create a password.
© Select [Start] - [Turn Off Computer] - [Restart] to restart the computer.
(i eAiijiiiON
Remember this password! If the passw'ord is forgotten, Windows cannot be operated.
You can create a password reset disk beforehand ((^^ page 14).
12