Panasonic CF-18 - Manual (Page 9)

First-time Operation
Latch
Read the steps below to help you leam what parts are included, and to gain an understanding of
some basic computer-related operations.
1
Confirm the inclusion of all parts.
Make sure the parts shown in the figure have been supplied. If any of these items are
missing or are not working properly, contact Panasonic Technical Support.
2
Read the LIMITED USE LICENSE AGREEMENT. ((^ page 32)
Before removing the seal covering the power switch, read the LIMITED USE LICENSE
AGREEMENT.
3
Insert the battery pack.
(T) Unlock the cover by sliding the latch to the right.
@ Slide the latch down, and then without releasing it, open the cover as illustrated.
@ Slide the battery pack inward until it is firmly in place,
-(<
.&AlJiTilON D
• Do not touch the terminals on the battery pack and the computer. The
battery pack may no longer function properly if the contacts are dirty or
damaged. Also, the computer may not operate properly.
• Be sure to insert the battery pack as illustrated.
(4) Close the cover, then lock it by sliding the latch to the left.
------------------------------------------------
Confinn that the latch lock is correctly in place. If you carry your computer
without the latch lock in place, the battery pack may fall out.
Before using the battery pack, carefully read "Precautions (Battery Pack)”
(Q= page 6).
__y