Panasonic NV-SD10 Series User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Requesting Service
Recording will not operate correctly
SYMPTOM
; CAUSE
REMEDY
GHECKED
Alarm sound is
produced and
indication Hashes
whenever recording
is attempted.
Erasure prevention tab on
cassette is broken off.
Use tape with intact erasure prevention tab, or cover
tab hole with adhesive tape, if original recording is no
longer required.
Picture is recorded
with noise or blank
screen.
Aerial or aerial lead is
defective.
Check aerial connection to VTR. See page 6.
Check your normal TV picture. If there is no picture,
check your aerial.
VTR is not correctly tuned.
Re-tune VTR. See page 8.
Ensure input selector set to TV programme.
Input selector is set to A1.
Select the required TV programme.
Timer recording
cannot be
performed.
Clock or calendar is
incorrectly set.
Check ciock and calendar. Set to present time.
(Note this is a 24 hour ciock.) See page 10,
Clock is flashing 0:00.
Set clock to present time.
Recording start or stop time
settings are incorrect.
Set recording start and stop time correctly. Try a short
timer recording a few minutes ahead of the present
time to confirm correct operation. See page 24.
VTR is not set for timer
recording.
Press TIMER REC after programming for timer
recording.
AV external
recordings cannot be
made.
Input selector is not correctly
set.
Select At.
External AV connections are
incorrect.
Check that connections for external video and audio
source are correct. See page 29.
37