Panasonic NV-SD10 Series - Manual (Page 9)

storing TV Broadcasts into your VTR
c
o
Fine Tuning Procedure
1 Press TUNER PRESET until a bleep sound is heard, and
then press again.
2 Press NEXT.
3 Press + or “ to obtain the best tuning condition.
• “AFC” Indicator disappears.
• To return the tuning to its former state, press SHIFT.
4 Press TUNER PRESET.
Blanking of Unoccupied Programme
Positions
1 Press TUNER PRESET until a bleep sound is heard.
2 Select a programme position which you do not want to
tune to a TV station, by using + or —.
3 Press SHIFT. {“- is displayed.)
• Repeat steps 2 and 3 for other unoccupied programme
positions to skip during the selection of the programme
positions.
•To cancel the blanking of a programme position, select
that programme position on the VTR and then press
SHIFT.
4 Press TUNER PRESET twice.
Channel Plan
PRE-PROGRAMMED TV CHANNELS (NV-SD10A)
The local TV transmission channels 2, 7, 9 and 10 are
factory-preset in this VTR. That is, if you can receive
television broadcasts on VHF channels 2, 7, 9 and
10, these are already tuned on the programme
positions with the matching numbers.
However, it is possible to cancel these presettings
and tune the local TV broadcast channels on any
desired programme positions.
For alternative settings and tuning of additional TV
broadcasts channels, follow the Tuning Operations.
VHF UHF
1 III U
NV-SD10A 0-5 ' 5A-11
I
21-69
NV-SD10EA 1-3 ; 4-11 21-69
■ j