Installation hardware, Overview, A required tools – Panasonic FULL FRONT MP3 CD PLAYER CQ-DFX972U User Manual

Page 52: Dashboard specifications, W^irimiimg

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

шшЫ

W^IRIMIIMG

This installation information is designed for experienced installers and is not in­
tended for non-technical individuals. It does not contain warnings or cautions of po­
tential dangers involved in attempting to install this product.

Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious
personal injury or death.

□ Installation Hardware

No.

Item

Diagram

Q’ty

Ф

Mounting collar

1

CD

Hex. nut (5 mm^)

1

(D

Rear support strap.

1

0

Tapping screw

(5 mm0x16 mm)

1

CD

Mounting bolt (5 mm0)

1

0

Power

connector

1

CD

Removable face plate

case

1

0

Trim plate

1

0

Lock cancel plate

2

□ Overview

This product should be installed by a professional.

However, if you plan to install this product yourself,

your first step is to decide where to install it. The

instructions in these pages will guide you through

the remaining steps:

(Please refer to the “WARNING” statement
above.)

о Identify and label the car wires.

о

Connect the car wires to the wires of the power
connector.

52

GQIDRX912jJ

o Install the unit in the dashboard,
o Check the operation of the unit.
If you encounter problems, please consult your
nearest professional installer.

Caution:

oThls unit operates with a 12 V DC negative

ground auto battery system only. Do not at­

tempt to use it in any other system. Doing so

could cause serious damage.

Before you begin installation, look for the items
which are packed with your unit.

{

©Warranty Card.

..Fill this out promptly,

o Panasonic Servicenter List for Service Directory

...Keep for future reference in case the product

needs servicing.

o

Installation Hardware..

.Needed for in-dash in­

stallation.

a Required Tools

You’ll need a screwdriver, a 1.5 V AA battery, and
the following:

12V DC

Electrical

Side-cut

Test bulb

tape

pliers

□ Dashboard Specifications

Thickness Min. У

16

" (4.75 mm)

Max.

Vsf

(5.56 mm)

^

] 2%2" (53 mm)

75

^

2

" (182 mm)

Advertising