Panasonic FULL FRONT MP3 CD PLAYER CQ-DFX972U - Manual (Page 55)

□ Installation Procedures
First complete the electrical connections, and
then check them for correctness. (=» page 58)
The included mounting collar 0 is designed
specially for this unit. Do not use it to attach
any other model.
Insert mounting collar 0 into the dashboard, and
bend the mounting tabs out with a screwdriver.
Fastening the mounting collar
The tabs to be bent vary depending
on the car. Bend them with a screw­
driver to fasten the mounting collar
0 securely in the dashboard.
^ Dashboard
Tab
— 0 Mounting collar
-Tab
Note:
oTo securely install the unit, fully
bend a number of the tabs so that
there is no rattling,
o Be sure to fasten the unit securely
when joining it with the mounting
collar 0.
Secure the rear of the unit.
After fixing mounting bolt ® and power connector ©,
fix the rear of the unit to the car body by either
method (a) or (b) shown below.
Insert trim plate 0.
After installation, recon­
nect the negative
0
battery
terminal.
(a) Using the rear support strap (з)
Fire wall of car
d) Tapping screw /
(5mm0x16mm) / 3mm0
0 Hex. nut
{5 mm0)
I) Rear support
strap
(5) Mounting bolt
(5 mm0)
Mounting collar
(b) Using the rubber cushion (option)
Rear support bracket
Rubber cushion (option) (provided on the car)
0 Mounting bolt
(5 mm0)
0 Mounting collar
GQ1DRX912U
55